Powerful and compact switching power supply for laboratory applications. The setting of voltage and current is continuously via digital control dial with coarse and fine adjustment, in order to enable a fast and precise setting. The values are displayed in concise LC display. The current limit for the constant current operation without short circuits can be preset.The output voltage can be tapped at the front side via 4 mm safety sockets up to 5 A and high power output to maximum power at the back side.The mains adapter can be remote-controlled. An external voltage (0 - 5 V/DC) or external potentiometer (5 kOhm) the output voltage and output current can be adjusted. The DC output is turned on and off via the a switching contact.3 freely programmable memory locations, with different fixed voltages and current limits can be used. The selection switch is located on the back side. The device is overload and short-circuit-proof and contains a safety temperature cut-off.This text is machine translated.
Stockist | Price | |
---|---|---|
ConradElectronics01 | 694.42 | Visit Store |
The HPS-11560 from Voltcraft's HPS series of high power DC bench power supplies is extremely compact at 200 x 90 x 275 mm thanks to its primary switched mode technology. Its full rated current range 0 - 60A is via the PSU's rear output, while its front...
The high-performance power supply is primarily clocked and therefore very compact. The output voltage can be tapped at the front to 5 A and at the back of up to 60 A.This text is machine translated.
The VSP 2405 belongs to Voltcraft's successful VSP series of remotely controllable power supplies with sense function. It features 3 x outputs with setting ranges 0.1 - 40V DC (0 - 5A), 0.1 - 40V DC (0 - 5A), 0 - 6V DC (1.5A) with course and fine adjustment...