Switch actuator 1-way with three binary inputs for installation in a 60-incorporated flush-mounted socket Potential-free contacts can be connected to the three inputs. Optionally, an NTC temperature sensor can be connected to the third input. The inputs and the KNX are connected via a 6-wire, approx. 30 cm long connecting cable. The connection cable for the inputs can be extended up to a max. of 10 m. KNX Secure compatible. KNX software functions: Switching actuator functions: Operation as NC or NO contact. Selection of the basic position in case of bus voltage failure/return. Switch-on and/or switch-off delay. Time control function Switch. Status feedback. Lock function or forced guide. Scene function (64). Feedback object can be inverted. Input functions: Free assignment of the functions switching, dimming, blinds and value generators. Lock object. Behaviour in case of bus voltage recovery. Temperature, brightness, color temperature. Switch: Two switching objects per input. Command with rising/falling edge (ON, OFF, TOGGLE, no response). Dimming: Single and double-sided operation. Time between dimming and switching and dimming step values. Send message frame repetition and stop message frame. Blind: Command with rising edge (none, UP, DOWN, TOGGLE), operating concept (step - move - step or move - step). Time between short and long operation. Blade adjustment time. Signal emitter and light scene input: Edge (pushbutton as N/O contact, switch) and value on edge. Value adjustment by long keystroke for valuers. Light scene extension with storage feature. Logic-Module: Linking, converter, blocking element, comparator, limiting value. Rated voltage AC 230 V. Rated current 16 A resistive load. Switch contact: Closer, potential-free relay contact. Rated power: Bulbs: AC 230 V, max. 2500 W. Halogen lamps: AC 230 V, max. 2500 W. HV-LED lamps: AC 230 V, max. 400 W. Ohmic load: AC 230 V, 2500 W. Capacitive load: AC 230 V, 16 A, max.?140 µF. LV halogen lamps: Max. 1200 VA wound transformer, max. 1500 W electronic transformers. Inputs: 3. Temperature range: -5 °C to 45 °C. Dimensions: 48x50x28 (WxHxD). LV halogen lamps: Max. 1200 VA wound transformer, max. 1500 W electronic transformers. Note: For installation in a double box or an electronic box (Kaiser). There must be a minimum distance of 4mm between the 230V connection and the connection for the KNX inputs (SELV).This text is machine translated.
Stockist | Price | |
---|---|---|
ConradElectronics01 | 584.23 | Visit Store |
Valve drive actuator with regulation, REG. SpaceLogic KNX valve actuator. For controlling electro-thermal valve operating mechanisms for heating or cooling ceilings. The valve operating mechanism has 6 electronic outputs. Up to 4 valve operating mechanisms...
Schneider Electric KNX The KNX DALI Gateway connects the KNX bus with 1 DALI output. The Gateway is a Category I DALI control unit with integrated DALI power supply for the ECGs. Up to 64 ECGs can be switched and dimmed in 16 groups and over 16 scenes...
With the Modicon modular safety controller XPSMCM, security applications can be easily configured and the system can be flexibly expanded with modules according to the application. This expansion module with 4 analogue inputs makes possible the safe recording...