Schneider Electric MTN6500-0103 Expansion
Spacelogic KNX IP Router DIN-rail. The Spacelogic KNX IP Router enables the transmission of telegrams between different lines via a LAN (IP) as a fast backbone. In addition, this KNX IP router is suitable for connecting a PC to the KNX network, e.g. for ETS programming. The KNX IP Router supports KNX Security, which can be activated in the ETS. As a secure router, the device enables the coupling of unsecured communication on KNX TP to a secure IP backbone. For interface functionality (tunneling), KNX security prevents unauthorized access. The router supports up to 8 tunneling channels. A separate individual address must be configured for each tunneling channel. The IP address can be obtained via a DHCP server or through manual configuration (ETS). This KNX IP router operates according to the KNXnet/IP specification and uses the core, device management, tunneling and the routing part. The Spacelogic KNX IP Router has an extended filter table for the main group 0 to 31 and can cache up to 150 frames. The router is supplied with power via the KNX bus. An additional power supply is not required. With 2 integrated push buttons for testing purposes and 3 status LEDs. For mounting on TH35 DIN rail according to EN 60715. The bus is connected via a bus terminal. The connection to the LAN network is done via the RJ45 jack. Device width - 1 module approx. 18 mm. Note - This application requires ETS 5 or later. Content - With bus terminal and cable cover.This text is machine translated.
