Schneider Electric 56508 Safety relay
The VigiPacT RH197P is a fault current protection relay for front panel mounting. It protects against direct or indirect contact with persons, fire hazards and motors. It measures the ground fault current in an electrical system via its associated toroidal transformer. It triggers the associated circuit breaker when the set residual current is exceeded. The supply voltage is 380/415V AC 50 Hz It is a type A fault-current protection class. The current sensitivity can be selected with 19 threshold values from 30 mA to 30 A. The time delay can be selected with three settings from immediately up to 7 seconds. The alarm is set by DIP switch to 50% of IDN. A switch allows you to choose between manual on-site reset or automatic reset after troubleshooting. The monitored voltage of the distribution system is up to 1000V AC 50/60/400Hz. It is installed on a control panel on the front and has the protection class IP40. It must be connected to a compatible Schneider Electric type A toroidal or rectangular sensor.This text is machine translated.
