Rohde & Schwarz NGA102 Bench PSU (adjustable voltage) 35 V (max) 6 A (max) 80 W programmable remote controlled No of
Linear designModern electronic circuits are often complex and sensitive to disturbances on the supply line. The linear design of output stages allows the power supplies of the R&S®NGA100 to operate with minimum ripple and noise. The supply of extremely stable output voltage and current is crucial for the development of sensitive components.High readback accuracyThe R&S®NGA100 power supply series has excellent programming and readout accuracy to accurately measure and map the actual power consumption of a device.Even at low voltage and current values. These built-in measurements reduce the need for external multimeters and simplify setup.Built-in statisticsThe integrated statistics show the min. and max. values for power, voltage and current.Independant channels (R&S®NGA102 and R&S®NGA142)The two channels have completely separate circuits and are not connected to the housing ground was made easy by combining channels for bipolar circuits that may be+12 V/-12 V. Both channels are electrically equivalent, with the same voltage, current and power. The two channels operate as separate power supplies and can be operated individually or simultaneously. FlexpowerThe R&S®NGA100 series works with maximum power at different operating points and covers far more applications than single-range power supplies. All possible voltage and current combinations are shown in the corresponding Flexpower curves. This text is machine translated.
