Jumo 00394875 Program selector
The multi-channel process and programming controller for installation of control panels in a 144 mm x 130 mm front format requires a panel cut-out of 92 mm x 92 mm and an installation depth of 170 mm. It is equipped with 2 universal inputs, 6 binary inputs, 2 relay outputs (normally open contact), 1 analogue output, 1 RS422/485 interface and requires a power supply in the range AC 110 to 240 V +10/-15%, 48 to 63 Hz. This device version has an additional 4 free slots for optional boards. The controller can be used as a constant controller, two, three point, three point, position or cascade controller. A difference or ratio control is also possible. It is a process and program controller with two controller and four program channels. 50 programs can be programmed with a maximum of four program channels. The program channels run synchronously and can consist of up to 100 sections. A total of 1000 sections can be programmed. 16 control contacts can also be programmed, which can be assigned to the sections of the program channels and which can also be carried along synchronously. You can start a program manually by pressing a button (on the device or external button) or by programming start conditions. The time can be set either by setting a lead time or by programming the date and time. The display is a 5 color screen with 27 colors. Linearizations of standard transducers are stored. The device can be integrated into a data network via the RS422/485 serial interface. The electrical connection is made at the rear via screw plug-in terminals. The controller has cULus approval.This text is machine translated.