Image of ID CURCE-LS6503A51 Currie Enterprises Extreme 60 High Pinion Front and Rear Axle Set with 513 Gears and ARB Air Lockers - CE-LS6503A51
 

ID CURCE-LS6503A51 Currie Enterprises Extreme 60 High Pinion Front and Rear Axle Set with 513 Gears and ARB Air Lockers - CE-LS6503A51

18-Current Wrangler JL, 2 & 4 Door;Not compatible with 4-cylinder e-torque equipped vehicles;ARB Air Lockers;5.13 gear ratios;Fully assembled extreme 60 high-pinion front and rear axle assemblies;70-inch width (+2.3 in. wider per side);8-lug wheel bolt pattern for ultimate reliability;Satin black powder coat finish for long lasting protection;High-clearance center section with rotated cover improves obstacle slide-over;High-pinion design raises the driveshaft by 2-inches for additional clearance;Ring gear load bolt prevents deflection to deliver maximum high-pinion gear strength;High volume flow-thru pinion oiling system keeps bearings bathed in cool oil;Rock slider low-friction skid plate sides over trail obstacles with ease;California Residents: WARNING The Currie Extreme 60 front and rear axle set for the Jeep Wrangler JL, is designed for severe off-road use with tires up to 40-inches and V8 horsepower. The high-pinion design features Currie's exclusive rotated center section with ring gear load-bolt, a combination that delivers superior obstacle slide-over and unmatched gear strength. If you seek out the most challenging routes and toughest obstacles to conquer, the Extreme 60 axle set is a natural choice.The Extreme 60 high-pinion axle set for the 2018 and newer Jeep Wrangler JL, includes complete bolt-in front and rear axle assemblies with all required brackets and mounts in place. The vehicle's factory driveshafts will require modification or replacement to accommodate the larger 1350 series u-joint and 60 series housingNotes:ABS Sensors: Axles do not include ABS sensors, the factory sensors from the stock axles must be retained and installed on the Extreme 60 front and rear housingsComputer Programming: A programmer is required to reset the gear ratio and tire height settings in the vehicle's computer for the proper function of the vehicles stability control and transmission shift points when larger than stock tires are installedBrake Upgrade: The big brake kit included with the Extreme 60 uses 13.25-inch rotors and F350 dual-piston calipers in the front and 13.75-inch vented rotors in the rear to provide the stopping power required for large tiresWheel and Tire Size: 17-inch or larger wheels are required for proper clearance of the brake calipers. The maximum recommended tire size is 40-inchesOverall Width: Axle width is 70-inches between wheel mounting surfaces. Additional width improves turning angle with 37-inch and larger tiresSteering Stabilizer: The Extreme 60 ram assist bracket requires an aftermarket stud style trac bar bolt to accommodate a steering stabilizer. Trac bar bolts are availabl

Price: USD 17991.32

Stocklist Catalogue Product Name Price
Automotive & Industrial ID CURCE-LS6503A51 Currie Enterprises Extreme 60 High Pinion Front and Rear Axle... USD 17991.32

Sitemap