ID 1190372022 Hanna (HI96701) Chlorine Meter (Free) 000-25 MG-L
CAL CHECK™User calibrationCertified calibration and verification standardsBEPS (Battery Error Prevention System)TIMER functionAuto shut-offGLP Features Chlorine is widely used in making many everyday products, but most notably, it is used for producing safe drinking water the world over. Even the smallest water supplies are now usually chlorinated. It is also extensively used in the production of paper products, dyestuffs, textiles, petroleum products, medicines, antiseptics, insecticides, food, solvents, paints, plastics, and many other consumer products. Most of the chlorine produced is used in the manufacture of chlorinated compounds for sanitation, pulp bleaching, disinfectants, and textile processing.Organic chemistry demands much from chlorine, both as an oxidizing agent and in substitution, since it often brings many desired properties in an organic compound when substituted for hydrogen, as in one form of synthetic rubber.The HI 96701 meter measures the free chlorine (Cl2) content in water samples in the 0.00 to 5.00 mg/L (ppm) range.This meter uses an exclusive positive-locking system to ensure that the cuvette is in the same place every time it is placed into the measurement cell.Order Information:HI 96701 is supplied with sample cuvettes with caps (2), 9V battery and instruction manual. Range 0.00 to 5.00 mg/L (ppm)Resolution 0.01 mg/L from 0.00 to 3.50 mg/L;0.10 mg/L above 3.50 mg/LAccuracy ±0.03 mg/L ± 3% of reading @ 25°CLight Source tungsten lampLight Detector Silicon photocell with narrow band interference filter @ 525nmPower Supply 9V batteryAuto-off After 10 minutes of non-use in measurement mode; After 1 hour of non-use in calibration mode; with last reading reminder.Environment 0 to 50°C (32 to 122°F); RH max 95% non-condensingDimensions 192 x 104 x 69 mm (7.6 x 4.1 x 2.7")Weight 360 g (12.7 oz.)Method Adaptation of the USEPA method 330.5 and Standard Method 4500-Cl G.
