HT Instruments Volle Ladung Electrical tester set Calibrated to (ISO standards) VDE standard 0413
The new VDE 0100 package with charging column adapter. Ensure our supply and test our electrical infrastructure, simple and reliable.Combi G3The low weight and ergonomic design of the Combi G3 ensure comfortable and safe operation. The large and bright illuminated touch screen is particularly easy to read and can be used intuitively. All functions can be selected via the central multifunction switch or directly by selecting the icons on the screen. The symbols in the display and acoustic messages provide for a clear, fast and standard-compliant interpretation of the measurement results. The Combi G3 is protected against incorrect operation, if the device is incorrectly connected or if dangerous voltages are present, the user is warned conspicuously. The large internal memory can hold up to 999 measured values and enables individual storage of the measurement results with text comment and tree structure (3 levels). One meter for all electrical safety tests according to VDE0413 (EN61557) Part 2, 3, 4, 5, 6 and 7.EV-Test100The EV-Test100 was developed as an accessory especially for testing E-charging stations. It can be used to simulate charging states and test the effectiveness of protective measures on Type 3 E-charging stations with a Type 2 connector. The easy handling in combination with the Combi G3 or Combi G2 is guaranteed by the new automatic EVSE test procedure, which guides you through all necessary measurements.Measurement functions- Universal 4mm sockets for connection to a 1- Or 3-phase installation tester with test leads (banana plug)- separate phase display by three LEDs for easy voltage testing- Proximity Pilot (PP) rotary switch to simulate different current capacities of Charging cables- Control Pilot (CP) rotary switch for simulating the electrical vehicle status A, B, C, D.- Rotary switch error to simulate a short circuit between CP and PE (state E = error)- Connection for the CP signal output to check the communication between Adpater (=simulated electric vehicle) and charging station- Type 2 connector for connectionThis text is machine translated.
