Amewi AMXPlanes Talon EDF Red RC model jet fighters PNP 1100 mm
From the house Amewi a fine 80mm EDF Sport-Jet, the AMXPlanes Talon, in the unique and worldwide exclusive SIBA-Design with remarkable equipment such as a Hobbywing 100A regulator, a 3280-2200KV brushless motor, altogether 8 digital servos with metal gear, a lot of power (thrust over 1:1) and a super finish, which looks for its same. The structure of this largely prefabricated PNP model is limited to the attachment of the elevator and the wings. All parts are screwed and all cables, the edge arc lighting, the landing gear and a distributor board, on which all the electrical components run together, are completely installed in the model. Servo extensions are integrated in the fuselage at the elevator. The wings are connected to the counterpart in the fuselage via a multi-pin connector and fastened with four screws. This establishes the connection to the aileron, landing flaps, lighting and landing gear. The chassis is electric, made of metal and towed. Bumps at start-up and slightly harder landings are not a problem. Thanks to the lush power of the finely balanced 80mm 12-blade impeller and the high-performance brushless motor with a specific speed of 2200KV at 6S, you can start even on grass after a short starting distance. The maximum attainable speed is above 200km/h, the flight time with e.g. 5000mAh 6S at approx. 5-6 minutes (depending on the flight style also more). To land the landing flaps can be extended, whereby the speed of the model decreases significantly. The Talon combines a pure-bred sports jet with good-natured flight characteristics - thus it is suitable for both professionals and pilots with a little less flying hours.This beautiful flyer is delivered in a full-color printed carton with a high-quality styrofoam inlay, in which each part has its own place. Thus, nothing can shift.This text is machine translated.
