Aim TTi MX180TP Bench PSU (adjustable voltage) 0 - 60 V 0 - 3 A 18 W 180 W No of outputs 3 x
The MX180T has two outputs each with a power of 0 to 30 V at 0 to 6 A and a third output with a power of 0 to 5.5 V at 0 to 3 A. Each output has simultaneous measurement with high resolution, switchable remote sensing and an individual output switch. The MX180TP includes USB, RS232, and LXI-compatible LAN interfaces. These offer a complete remote control and remote-controlled reading and are supported for hohem voice applications by an IVI driver. The AIM-TTi MX series offers impressive power density by combining high frequency switching pre-regulation with linear post-regulation to deliver a performance that is close to that of a completely linear design. Excellent phase and load regulation is tuned with low noise level and good transient response. In order to be used in a variety of applications, each output has more than one range. Outputs one and two can provide either 60 V/3 A or 15 V/10 A as an alternative to 30 V/6 A, while output can provide three 12 V/1.5 A. If higher performance is required, outputs one and two can be combined to provide up to 360 watts either 30 V/12 A, 15 V/20 A, 60 V/6 A or 120 V/3 A from a single output.This text is machine translated.
