The MX 180 T has two outputs with a performance of each 0 to 30 V at 0 to 6 A as well as a third output with an output of 0 to 5.5 V at 0 to 3 A. Each output has simultaneous measurement with high resolution, switchable remote scanning and an individual output switch. The MX180 TP contains USB, RS232, GPIB and LXI-compatible LAN interfaces. They offer a full remote control and remote-controlled reading and are used for voice applications at a high level by an IVI-drivers are supported. The Aim Series-TTi MX offers an impressive power density due to the combination of schalt-vorregulierung with high frequency with linear after adjustment, in order to deliver the performance of a completely linear design. Excellent phase and load balance is with low noise level and good transient response. In order to be used in a variety of applications, each output via more than one area. Outputs one and two can either 60 V/3 A or 15 V/10 A as an alternative to 30V/6A, while output three 12 V/1.5 A can provide. If a higher performance is required, you can outputs one and two are combined, up to 360 watts as either a 30V/12A, 15V/20A, 60 V/6 A or 120 V/3A of a single output.This text is machine translated.
Stockist | Price | |
---|---|---|
ConradElectronics01 | 1681.53 | Visit Store |
No. of outputs 2 x; - Output 1; - Output 1; 360 W; ; Large, through the maximum performance limited voltage and current range; Separate displays for current and voltage; Sensor cable (sense); Surge protection OVP; By means of secondary switch can be switched...
The power supplies with two outputs CPX 400 D and CPX 400 DP have a power flex control, with the higher currents at low voltages within a power envelope can be generated. You have intelligent analogue controls with setting block and an isolated voltage...
The CPX400S is a version with simple output of the very popular series CPX400 Power Flex power supply units with 2-fold-output. Available in three versions: only manual control (CPX 400 S), with insulated analogue remote control (CPX400 SA) or with a...